600watt Portable 3-way Powered PA System

Alto Professional MixPack portable 3-way powered PA system is a part of the MIXPACK line of portable powered PA systems. Alto Professional MixPack has a 12" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 600 watts of continuous pure Class AB power.

MIXPACK doesn't stop with professional amplification and speakers. A 10-channel mixer is included so you can connect everything from musical instruments to microphones to an iPod. Maybe your band is gigging or you are a live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power, Regardless of where the performance takes you, MIXPACK is easy to set up with all the right connections. Stands are included so you can get the sound where it needs to go.

Once all your gear is connected to MIXPACK, you can go to work on fine tuning for the venue with MIXPACK's built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance.

Alto Professional MixPack Features:

• Portable 3-Way Powered PA System w/ 12
• 12” subwoofer and two 2x6.5” speakers with 600W continuous rated power
• 8 Channel Mixer with digital effects, 7-band graphical EQ and XLR, Line and RCA inputs
• Lightweight, one-piece design for convenient transport; microphone and speaker cables included

Alto Professional MixPack Specifications:

• Low Output Power: 150W RMS Class AB
• MID-HIGH-Output Power: 75W+75W RMS Class AB
• Peak Power Ratling: 600W Peak
• Maximum SPL @ 1m: 116.5dB Continuous - 119.5dB Peak (calculated)
• Frequency Response: 55Hz-20KHz @ -10dB
• Impedance: Low-Mid/High Low 8ohm - Mid/high 8ohm
• Crossover Frequencies: Active 125Hz at 12dB/Oct - Passive 3000Hz at 12dB/Oct with Electronic Dynamic Protections
• Amplifier Protections: Low-Mid/High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB/Oct - Limiter/Compressor
• Low Frequency Device: 12"/318mm - 2" Voice Coil
• Mid Frequency Device: 4×6.5"/165mm - 1.5" Voice Coil
• High Frequency Device: 2×1"Compression Driver - 1" Voice Coil
• Hom Coverage: H° × V° 80°H × 80°V
• Equalization: Hi shelving ±15dB@12KHz, Mid bell ±15dB@2.5KHz, Low shelving ±15dB@80Hz
• A/D and D/A converters: 24bit
• DSP resolution: 24bit
• Type of effects: Reverbs, Stereo, Delay, Chorus, Rev+Delay and Rev+Chorus combinatons
• Presets: 16