500watt Active 15'' PA Speaker - Single

Alto Professional TrueSonic PRO TS-115PA active 15" PA speaker gives 500watts continuous power and 1000watts peak power!  Alto's PRO TS-115PA have a neodymium magnet design, which helps the 15" LF driver produce a smooth, low-distortion sonic signature.  This helps to keep the weight of the speaker unit as low as possible. The 1" HF compression driver was custom designed specifically for the TRUESONIC PRO speaker to lend an incredibly natural sounding high end across a wide dynamic range. TRUESONIC PRO speakers are designed to be the finest-sounding speaker in their class.

Alto Professional TrueSonic PRO TS-115PA feature a durable, lightweight polypropylene enclosure that is stand mountable for weekend gigs and flyable for more permanent installations. What's more, the have a trapezoidal design which greatly decreases the resonance of the standing wave in the cabinet for a more true and exact sound reproduction.

TS-115PA by Alto are among the most powerful in their class, thanks to a massive 500 watts of continuous power. This means that TRUESONIC PRO speakers are capable of producing some serious volume that will take you from the smallest venue to a respectable hall without any trouble at all.

Alto Professional TrueSonic PRO TS-115PA Features:

• 2-way 15-inch active speaker system
• 500W Continuous / 1000W Peak provided by Class D switch mode power supply
• DSP engine offers more accurate representation of signal
• Very lightweight
• 15-inch LF driver with a lightweight neodymium magnet
• 1-inch custom-designed HF compression driver
• Lightweight, extremely durable polypropylene trapezoidal enclosure

Alto Professional TrueSonic PRO TS-115PA Specifications:

• Power System: Continuous-500W (350W LF Class D + 150W HF class AB), Peak-1000W (700W LF + 300W HF)
• Frequency Response: (-10dB) 48Hz-18KHz
• Maximum SPL @ 1m: 123dB Continuous/ 126dB Peak
• Coverage ( HxV ): 80°/100°x 60° nominal
• Transducer Low: 15" Neodymium Woofer, 2.5" voice coil
• Transducer High: 1"compression Driver with 1.75"voice coil
• Electronic Protections: Thermal / Convection-Fan / Overload / Dual Digital Lim./Compressor
• DSP Processor: Custom DSP at 24bit / 48kHz
• Crossover Frequency: 2kHz with 24dB filter slope, Linkwitz-Riley type
• Input Level: Line 0dBu
• Input Impedance: 30kohm Balanced / 15kohm Unbalanced
• Input Connector: LINE-COMBO/ LINK-XLR
• External Control: Volume Control/ Power ON with Green LED/ Clip Limiter with Red LED/ Ground Lift
• Power Supply: AC-220/240V or AC-110/120 Volt, with Switching Power Mode
• Enclosure Construction: Trapezoidal shape / Floor Monitor facility / Polypropylene Plastic Cabinet
• Mounting: Integrated Std. pole-mount/ two handle /two eyebolt point
• Dimensions (HxWxD): 679mm x 430.3mm x 385mm (26.73" x 16.94" x 15.16")