2x10 + Tweeter Bass Combo, Mag EVO II 307 Watts

The Ashdown Mag C210T-300, 2 x 10 + tweeter bass combo features a potent new fan-cooled 307 watts RMS power section. Rotary bass, middle and treble controls are supplemented by smaller rotary controls providing 15dB of cut and boost at 220Hz and 1.6kHz, providing a comprehensive 5 band EQ section. Additionally, front panel push switches for Bright and Deep settings provide instant access to attacking and warm, rounded sounds respectively and, on the subject of low-end response, the trademark Ashdown sub-harmonic generator is ready and able to deliver truck loads of earth moving tone if called upon. Inputs are provided for active and passive instruments and the front panel also features an effects send and return, a tuner/line output and a balanced DI output for direct connection to a mixing console.

With the MAGs now achieving EVO II status, the amplifier also includes a built-in compressor with precision sonic control.

Power is delivered through custom Ashdown BlueLine speakers – famous for their controlled and extended low end performance, exceptional midrange attack and bright top end.

The cabinet is protected by a tough carpet covering

Specificationsof the Ashdown Mag C210T-300:

• Power Output: 307 watts RMS
• Speaker Configuration: 2x10" BlueLine speaker + tweeter
• Height: 579mm (22.8")
• Width:  604mm (23.8")
• Depth: 335mm (13.2")
• Weight: 28kg (61.7lbs)
• High Input: Impedance 3.9MOhms / Input range 150mV - 20V p-p
• Low Input: Impedance 10KOhms / Input range 300mV - 40V p-p
• Line Input: Impedance 22kOhms / Input level 0dBu nominal
• Effects Return: Impedance 22kOhms / Level 0dBu nominal
• Tuner Output: Impedance 22kOhms / Level 0dBu nominal
• Effects Send: Impedance 22kOhms / Level 0dBu nominal
• DI Output: 600 Ohms balanced / Level -20dBu nominal
• Speaker Outputs: Minimum impedance 4 Ohms
• Bass: +/-15dB @ 100Hz
• Lo Mid: +/-15dB @ 220Hz
• Middle: +/-15dB @ 660Hz
• Hi Mid: +/-15dB @ 1.6kHz
• Treble: +/-15dB @ 7kHz shelving
• Deep: +8dB @ 50Hz
• Bright: +10dB @ 10kHz
• Signal to Noise: Better than 80dB (EQ flat)
• Distortion: Less than 0.5% THD
• Frequency Response: -3dB at 17Hz and 30KHz
• Power Requirements: 230 /115v