1600watt Power Amplifier

The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and true design principles and innovative features. The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight.

XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within
budget. Every XLS Series amplifier is backed by Crown’s unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!

XLS Series Features:

• Reliable design incorporates many popular features
• Housed in a rugged, all-steel 2U chassis
• Efficient forced-air fans prevent excessive thermal buildup
• Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
• Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

XLS Series Specifications:

Power Output (per channel) at 4ohms:

• XLS-202: 300W
• XLS-402: 450W
• XLS-602: 600W
• XLS-802: 800W

Power Output (per channel) at 8ohms:

• XLS-202: 200W
• XLS-402: 300W
• XLS-602: 380W
• XLS-802: 500W

Power Output (8ohms Bridged-Mono):

• XLS-202: 600W
• XLS-402: 900W
• XLS-602: 1200W
• XLS-802: 1600W

Dimensions (WxHxD):

• 48.3 x 8.9 x 38.6 cm

Weight:

• XLS-202: 23.0 lb (10.4 kg)
• XLS-402: 25.7 lb (11.7 kg)
• XLS-602: 29.0 lb (13.2 kg)
• XLS-802: 35.5 lb (16.1 kg)

XLS Series Technical Specifications:

(The following applies to units in Stereo mode with 8-ohm loads unless otherwise specified.)

• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V.
• Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, –1 dB.
• Signal-to-Noise Ratio (20 Hz to 20 kHz, inputs terminated)
  A-weighted, below rated power: > 100 dB.
  No weighting, below rated power: > 95 dB.
• Total Harmonic Distortion (THD): < 0.5%.
• Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
• Load Impedance: Rated for 4 to 8 ohms per channel in Stereo, 8 ohms in Bridge Mono.
• Level: Two front-panel rotary level controls, one for each channel.
• Power: Front-panel switch
• Circuit Breaker: Back-panel breaker provides overload protection.
• Mode Switch: Back-panel switch selects Dual or Bridge-Mono mode.
• Signal Presence Indicators: Two green LEDs, one for each channel, illuminate when the channel’s input signal exceeds –40 dBu.
• Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel’s output is being overdriven.
• Power Indicator: Blue LED indicates amplifier has been turned on and AC power is available.
• Fault Indicator: Two red LEDs illuminate when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on.
• Input Connectors: One per channel; backpanel three-pin female XLR input connectors.
• Output Connectors: Two 4-Pole Speakon®