25/50W All Tube 1x12 Guitar Amplifier with HD Amp Modeling

The Line 6 DT50 112 Amp Modeling All Valve Guitar Combo, goes way beyond any other amplifier in producing the best amp tones. The DT 50 112 with it's new HD modeling technology, plus a host of switchable analog components, and a simple and elegant 2-channel interface puts this amplifier in an entirely new category of it's own.

The DT 50 112's New Line 6 HD modeling technology fully integrates with Reinhold Bogner’s most flexible tube design. It breathes unparalleled warmth, feel and depth into the amp voicings on which all great amplifiers are based – classic American cleans, chimey and crunchy English tones, and modern high-gain distortion. The 4-way Voicing switch is the heart of DT50 112, and flicking this switch starts a chain reaction that produces these incredible tones.

Brand-new Line 6 HD modeling technology fuels each Voicing’s preamp and tone stack, and automatically pairs them with dynamic analog circuitry including tube configuration and negative feedback topology (courtesy of Reinhold Bogner’s uniquely versatile 50-watt, EL34 power section). You get high amounts of negative feedback when you want your American clean tones to gleam and shine, zero negative feedback when you want your chimey English tones to sport their signature dynamics, and everything in between. All four Voicings deliver their heralded sonic signatures.

With beauty deeper than its striking good looks, DT50 112 has a traditional two-channel format that is stunningly simple and instantly usable.

Line 6 DT50 112 Main Features:

• Brand-new Line 6 HD amp modeling technology seamlessly integrates with Reinhold Bogner’s uniquely (and extremely) versatile tube sections.
• DT50 112 goes further than any other amplifier to produce great amp tones. Many amplifiers offer either modeling technology or reconfigurable analog circuitry, but DT50 offers both to deliver something bigger than the sum of its parts.
• (2) 12AX7 preamp; (2) EL34 power amp; Reconfigurable analog circuitry: negative feedback loop, operating class (class A, class AB), power tube mode (pentode/triode); low-power mode; 2-channel design.
• Front panel: (Channels A and B) Drive, Bass, Mid Treble, Presence, Reverb, Channel Volume; Channel switch; Voicing switch; Pentode/Triode switch; Class A/Class AB switch; Master volume; Power; Standby.
• Back panel: MIDI I/O; Channel footswitch input; L6 LINK™ in and out/thru; FX loop with Level control; Balanced direct out; Speaker outs (4 ohm, 8 ohm and 16 ohm).
• Connect a POD® HD multi-effect pedal to control all DT50 Voicings and parameters from the floor while taking advantage of the enormous collections of FX and HD amp models in POD HD.
• DT50 112 features a 12-inch custom Celestion® G12H90 speaker; 
• Effects & Connections: All DT50 amplifiers include a high-quality spring reverb model on each channel, a serial FX loop with level boost/cut, and a push/pull volume pot that engages a Low Volume Mode, which is perfect for late nights or smaller venues. An output transformer-tapped XLR connection provides a cabinet-simulated direct output, providing a line-level output which dynamically interacts with the DT50 speaker and tubes. Channel switching can be achieved via standard 1/4-inch footswitch, MIDI, or L6 LINK connections.