1400watt 3-way Tri-Amped PA Speaker - Single

Line 6 StageSource L3t 1400 watt powered PA speaker uses six powerful DSP-based Smart Speaker modes to optimize for a variety of scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, and acoustic guitar backline. Onboard accelerometer and pole mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly - for example, when the unit is powered on in a horizontal position, the L3t automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor.

Line 6 StageSource L3t Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization when linked to a 2nd StageSource loudspeaker. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.

If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L3t then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L3t activates Virtual Tilt-back, which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps to aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.

StageSource L3t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound. L3t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L3t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.

Line 6 StageSource L3t Features:

• 1400-watt, 3-way, tri-amped speaker system
• Dual direct radiator design with 1" Exit HF compression driver
• 132 dB max SPL
• 100degree horizontal x 50degree vertical coverage
• Smart Speaker modes for main PA, personal PA, floor monitor, instrument backline and more
• Multi-function, modular architecture for true scalability
• Multi-channel mixer with 3-band EQ, Smart Effects, acoustic guitar modeling and more
• Digital networking via L6 LINK™
• 12-band feedback suppression and output limiter
• On-board accelerometer and pole-mount sensors for sound optimization in horizontal, vertical, or pole-mount applications
• M10 suspension points
• Dual-braced tour-grade plywood construction
• Retractable Handle
• Direct Thru and Mix outputs