2000watt, Professional Stereo Power Amplifier

The new QSC GX7 amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. The GX7 outputs 725 watts into an 8 ohm load. The GX7's 1000 watts will very capably power many of today's popular subwoofers or two typical 8 ohm speakers per channel.

The GX7 adds the road-proven PowerLight supply to the Class H output section, for more overall output power and additional weight savings. The result is one of the highest power-to-weight ratios in the industry. A low-noise variable-speed fan with rear-to-front airflow keeps amplifiers and racks cool.

A subwoofer reduces strain on the full-range speaker, allowing it to play louder, or letting a smaller speaker do the same job. The GX Series supports this mode with a Crossover switch that splits the full-range input entering Ch 1, sending 20 Hz -100 Hz to the sub (Ch 1) and 100 Hz - 20 kHz to the top box (Ch 2). The front panel gain controls balance the sub and top box, while GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range.

QSC GX7 Features:

• Power levels matched to the most popular speakers used by entertainers
• Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
• Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source
• Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
• Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks
• Lightweight - GX7 only 16.5 lbs (7.5 kg)*
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor Power, Signal and Clipping
• Subwoofer/Satellite crossover built-in

QSC GX7 Specifications:

• 8 ohms / 1 kHz (both channels driven): 750 W
• 8 ohms / 1 kHz (single channel driven): 800 W
• 4 ohms / 1 kHz (both channels driven): 1000 W
• 4 ohms / 1 kHz (single channel driven): 1200 W
• Distortion (1 dB below rated power, 1 kHz): 8 ohms: less than 0.02%; 4 ohms: less than 0.05%
• Signal to Noise (20 Hz - 20 kHz): 100 dB
• Input Sensitivity: 1.2 Vrms
• Voltage Gain (8 ohms): 36.1 dB
• Output Circuitry: 2nd Tier Class H
• Frequency Response: 20 Hz - 20 kHz, +0, -1 dB
• Dynamic Headroom (4 ohms): 2 dB
• Input Impedance (ohms): Greater than 20k (balanced)
• Maximum Input Level: +24 dB (16 Vrms)
• Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced
• Output Connectors (each channel): Speakon®, 1/4", Binding Posts
• Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection, Load protected against DC faults
• Front Panel Controls and Indicators: Gain controls, 21 detents, Red Clip LEDs, proportional, 0.1% THD threshold, Green Signal LEDs, threshold -35 dB Blue Power LED, AC on
• Rear Panel Controls: (Full Range / Crossover switch) 100 Hz, 3rd order LP (sub), 2nd order HP (top)
• Dimensions: Height: 3.5" (89 mm) 2RU, Width: 19" (483 mm), Depth: 10.1" (257 mm)
• Weight: Net: 16.5 lbs (7.5 kg), Shipping: 21.5 lbs (9.75 kg)