USB Microphone from SE based on their superb SE22000a

The SE Electronics USB2200a is based on the studio standard SE2200a. The SE USB2200a records via USB directly to your DAW and has several features unique from competitor USB mics including zero latency headphone monitoring, mix control playback/record path, 10dB pad, bass cut and simultaneous analogue/USB feeds.

The SE Electronics USB2200a also has a proprietary chip and software set which deals with capsule noise when transforming the 5v power supplied via the USB cable to power the capsule, by first removing noise and spikes from the current. This noise would normally be amplified, which is why other USB mics are too noisy to use in a professional environment.

No other USB mic on the market offers the kind of specification found on the SE USB2200a, and it makes a huge difference to the performance for studio use. The chip also delivers true plug in and play capability, automatically configuring the mic to the host as it is connected.

SE Electronics USB2200a Features:

• Frequency Response: 20Hz-20KHz
• Sensitivity: 14.1mV/Pa -37 ± 1.5dB
• Polar Pattern: Cardioid
• Impedance: = 200 Ohms
• Equivalent Noise Level: 12dB(A weighted)
• Max SPL for 0.5% THD@1000Hz: 130dB
• Power Requirement: Phantom power 48V±4V
• Connector: 3-pin
• USB 2.0 USB1.x compatible
• Stereo D/A and A/D conversion
• Zero latency Headphone monitoring
• Gain Control built in
• THD > -90db, SNR 96db (D/A conversion)
• THD > -90db, SNR 92db (A/D conversion)
• Adaptive 44.1 to 48KHz sampling frequency