Welcome to Sounds Live

Acoustic, Electric and Bass Guitars, specialists in Keyboards, MIDI, Hi-Tech Recording and PA
Home |Search |Support |Contact Us |Privacy |Customer Feedback |About Us |Help/FAQ

Tannoy Reveal 6

  

Reveal Passive Near Field Monitors with 6'' LF Driver

Priced Per Pair!

Tannoy Reveal 6
Tannoy Reveal 6 - Click above for a larger image
Discontinued

Tannoy Reveal 6 description

Reveal Passive Near Field Monitors with 6'' LF Driver

New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces – linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. (Except R5A). Bass unit development using Klippell™ analysis equipment to minimise offsets and linearise the suspension components.

Tannoy Reveal 6 Main Features:

From the front:

  • 40mm MDF sculpted baffle – stiff, heavy and rigid and minimises diffraction.
  • Recessed drive units flush with the baffle surface – minimises diffraction.
  • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image.
  • Smooth tweeter faceplate contours prevent diffraction and cavity effects.
  • 10 point fixing maximises contact between drive unit and baffle.

From the side:

  • 18mm MDF cabinet construction provides stiffness and minimises colouration.
  • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange.
  • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.

From the rear:

  • Simple foolproof gold plated terminal panel. No degradation due to bi-wire links in the HF signal path.
  • OmniMount™ friendly fixing points for wall mounting.

Tannoy Reveal 6 Specifications:

  • Frequency Response: 65Hz to 51kHz
  • Recommended Amplifier Power: 50 to 100W @ 8 ohm
  • Power Handling Average RMS: 50W
  • Power Handling Programme RMS: 100W
  • Nominal Impedance: 6 ohm
  • Sensitivity: 90dB for 1W at 1m
  • Distortion: <0.6%
  • Crossover Frequency: 2.9kHz
  • Dispersion: (@-6dB) 90 degrees
  • DRIVE UNITS: LF/MID 165mm (6") multi fibre paper pulp cone, WideBand HF 25mm (1") titanium dome, neodymium magnet system.
  • Shielded: Yes
  • Cabinet Type: Optimised bass-reflex loaded
  • Construction: MDF cabinet and front baffle, Tongue and groove front and back
  • Finish: Grey cabinet, Maroon painted baffle

Customers who bought this item also bought

Shure - PGDMK66 Piece - Drum Mic Kit£349.00
Behringer - HA8000 - Powerplay Pro-88-Channel Headphone Distribution Amplifier£97.40
Yamaha MG 32/14FX32 input mixer swith digital effects£1,003.00
Alesis RA-150Studio Reference Amplifier£129.00
Alesis RA-150Stereo-150 watts-Studio Power Amp£129.00

Tannoy Reveal 6 Related Links

See if the Tannoy Reveal 6 is listed in our Ex-Demo, Clearance & Sales department.
Other products by Tannoy
Official Tannoy Website
Seen the Tannoy Reveal 6 cheaper?, Email us