600watt Powered 12'' PA Speaker in Black - Single

Wharfedale Titan 12A active 12" PA speakers, is the result of a unique EWG design aided by intensive computer modeling of natural acoustic wave propagation. To provide more acoustically transparent high-frequency pattern control, hard edges, corners, and parallel surfaces were eliminated from the design while still enabling 90 x 60 degree high frequency coverage. The smoother, more “organic” shape of the EWG design reduces high frequency distortion and diffraction eliminating acoustic artifacts found in other horn design technologies. The result is smoother frequency response, greater driver efficiency, and improved vocal and instrument reproduction.

• Proprietary 90° x 60° Elliptical Wave Guide horn design
• Power on indicator in horn throat and on rear panel

The Titan 12 ACTIVE features a state-of-the-art Class D low frequency amplifier design. Class D amplifiers are known for their extended efficiency, low heat dissipation and light weight compared to other amplifier classifications. Class D technology allows for unparalleled audio quality in a lightweight, powered speaker system. High frequency power is provided by a high quality, low distortion and highly efficient Class A/B amplifier.

The bottom of the Titan 12 ACTIVE provides a convenient built in polemount socket for easy mounting on a standard 35mm diameter speakerstand pole.

• The speaker stand receptacle features a locking screw to ensure stability.
• Ten M8 threaded rigging points are provided for a variety of safe flying

The Titan 12 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.

Designed for flexibility and ease of use, the Titan 12 ACTIVE also features a unique BASS RESPONSE OPTIMIZER, or “BRO circuit” that works like the “loudness” controls on vintage stereo systems. With the “BRO” circuit engaged, low frequency response increases as the overall volume is decreased providing for outstanding low frequency response at lower volume levels.

Wharfedale Titan 12 Active Specifications:

• System type: Active 12” 2-way Bi-Amplified system
• Frequency response +/- 3db: 55-20kHz
• Lf driver size mm / inches: 305mm / 12” 4 ohm
• Lf voice coil size: 64.26mm / 2.5”
• Hf voice coil size: 51mm / 2” 8 ohm
• Hf exit size mm / inches: 25mm / 1”
• Hf type: Compression Driver
• Hf diaphragm material: Titanium
• Horn dispersion (H x V): 90 x 60
• Hf horn shape: EWG - Elliptical Waveguide
• Crossover Frequency / Filter: 2.3kHz, 24dB per octave Linkwitz-Riley
• Hf driver protection: Independent LF and HF limiters
• Continous RMS: LF 250W, HF 50W
• Peak (Watts): LF 500W, HF 100W
• ProtectionType: Power switch on / off mute, Thermal Amplifier shutdown/auto reset, Low line voltage shut down at 60% nominal line voltage, DC Protection, Short protection, Clip limiter turns on approx at 250W with red LED indicator
• Power on indicator: LED
• Mic: -36dBu (-38.2dBv or 12.28mVrms)
• Rca: RCA: 0dBu (-2.2dBv or 0.775Vrms)
• Line: +4dBu (1.78dBv or 1.228Vrms) Maximum Input Level +22dBu
• Line input A: 20kΩ - Unbalanced: 10kΩ Maximum Input Level +22dBu
• Line input B: 20kΩ - Unbalanced: 10kΩ Maximum Input Level +22dBu+BV22
• Main eq: High (±10dB) 10kHz Shelving
• Main eq: Low (±10dB) 100Hz Shelving, Bass Response Optimizer ("BRO”™) circuit '+5dB at 60Hz, Subsonic Filter 30Hz, Second-order filter
• Input connectors A: Switchable balanced mic or line level input XLR / ¼” Combo jack
• Input connectors B: Line level combo jack: 1/4" -XLR / Summed dual RCA jacks
• Line output type: Switchable LOOP / MIX Balanced Male XLR connector, Balanced: 1k ohm - Unbalanced: 500 ohm, +4dBu (1.78dBv or 1.228Vrms)
• Enclosure type: Molded Polypropylene
• Finish: Grey or white
• Handle quantity: 2 carry handles (one on each side)
• Suspenison points: (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
• Stand adapter - BOTTOM: Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket
• Height ( mm / ins ): 556mm / 21.88”
• Width Front / Rear / mm / ins: 384mm / 15.11"-180mm / 7.1"
• Depth ( mm / ins ): 312mm / 12.28"
• Net weight ( kg / lbs ): 12.8kg / 28.16lbs
• Gross weight ( kg / lbs ): 14.8kg / 32.56lbs