Class D 840watt Active 15'' PA Speaker - Single

Wharfedale Titan 15D active PA cab is a bi-amplified powered speaker using Class D technology for the 15" LF driver and class A/B for the HF driver, creating a powerful system that is now even lighter than the previous generation. Wharfedale Titan 15-D features Qubit powerful and precise 24-bit 192kHz DSP processing system. Titan 15-Digital uses a 15" custom designed moisture proof woofer to prolong the working life of your powered pa system.

With advanced adaptive multi-band dynamic processing and filtering Qubit helps fine tune your system to sound natural and open. Qubit processing optimises the loudspeaker to provide smooth digital crossover points that are perfectly aligned in terms of phase response and time-domain. Protection is offered in the form of true independent adaptive LF and HF signal limiting that helps protect against thermal damage and driver over excursion. 

Qubit has an extended frequency response that goes way beyond the capabilities of our hearing, providing an extended phase response that remains linear throughout our natural hearing range. This enables Titan D to reproduce exceptionally natural transients and exhibit perfectly aligned time-domain characteristics.

Wharfedale Titan 15D Features:

• 2-Way Bi-Amplified
• 12" Custom Designed Moisture Proof Woofer
• Titanium Diaphragm HF Compression Driver
• Qubit 24-Bit 192kHz DSP Processing
• 350W RMS Class D LF Amplifier Module
• 70W RMS Class D HF Amplifier Module
• Independent LF and HF Signal Limiting
• Thermal, DC and Short Circuit Fault Protection
• Hi / Low EQ Controls
• Switchable 90Hz Monitor Filter
• BRO Adaptive Bass Response Optimiser
• Combo XLR/Jack Balanced Line Level Input and Output
• Rear Panel Mic / Line Switch
• Rear Panel Horn LED Defeat Switch
• Remote Volume Control (Applied voltage controlled)
• Ten M8 Threaded Inserts for Flown Applications
• Wall Mount Bracket Options Available Separately

Wharfedale Titan 15D Specifications:

• Mic Input Sensitivity: -40dBu
• Line Input Sensitivity: 0dBu
• Input Impedance: Balanced: 20kOhms; Unbalanced: 10kOhms
• Hum & Noise: -90dB
• Maximum Input Level: +20dBu
• Amplifier Protection: Power switch on/off mute; DC detection; Overload and short-circuit detection; Thermal/Heat sink protection; Output mute/auto reset
• Low Frequency Power: 350W RMS
• High Frequency Power: 70W RMS
• Monitor Filter: A 90Hz HPF Filter for stage monitor use.
• Remote Gain Attenuator: 3 pin Euroblock connector for remote volume adjustment of the Titan 15D. Linear control of the volume is achieved by variation of the applied voltage.
• Limit LED: Shows when either signal limiter is active (LF or HF).
• Power Amplifier Type: Class D HF and Class A/B HF modules.
• Equalization: HIGH (+/-10dB) 10KHz Shelving; LOW (+/-5dB) 100Hz Shelving
• Dimensions (HxWxD): 708mm x 477mm x 401mm / 27.9" x 18.8" x 15.8"
• Net weight ( kg / lbs ): 22.9kg / 50.38lbs
• Gross weight ( kg / lbs ): 27.7kg / 60.94lbs
• Finish colour: White