Active 360watt 8'' PA Speaker/Monitor in Silver - Single

The Wharfedale Titan 8 Active MKII has new features and improved amplifier technology which make it an even better solution for portable sound and fixed installation applications.

The 2 band EQ from the Titan 12A and 15A now features in the more compact 8A MKII model allowing fine tuning of the overall sound. In addition a rear mounted horn LED defeat switch has been added to switch off the throat mounted power LED, for use in situations where visual transparency is paramount.

Class D technology is now used for both the LF and HF sections, resulting in a more efficient and powerful system that is now even lighter than the previous generation. The Titan 8A MKII is bi-amplified with independent LF and HF signal limiting.

The Titan 8A MKII provides enough output and low frequency extension to be a standalone vocal PA for A/V and presentation work, when combined with a subwoofer it is ideal for use in a portable band or DJ setup.

The compact and stylish form factor, range of compatible Wharfedale Pro WPB brackets and versatile rigging points make the Titan 8A MKII an equally suitable choice for an installed background music or paging solution. The angled cabinet also makes the Titan 8A MKII a fantastic compact vocal foldback monitor.

Wharfedale Titan 8 Active MKII Features:

• 2-way bi-amplified
• Dual class D amplifier modules
• Switch mode power supply
• Horn LED defeat switch
• Custom 8” moisture proof low frequency driver
• Custom 1.2” exit compression driver
• 150W continuous LF power output
• 30W continuous HF power output
• Independent LF and HF signal limiting
• Thermal, DC and short circuit fault protection
• Switchable mic/line input with XLR/TRS combo connector
• 2 band EQ
• Balanced line level XLR output
• Eight threaded M6 inserts for flown applications

Wharfedale Titan 8 Active MKII Specifications:

• System type: Active 8” 2-way Bi-Amplified system
• Frequency response +/- 3db: 70-20kHz
• Line Output Connector: Switchable LOOP / MIX Balanced Male XLR Connector
• Sensitivity: 0dBu (-2.2dBv or 0.775Vrms)
• Impedance: Balanced: 1k ohm – Unbalanced: 500 ohm
• Input A - type: Switchable balanced mic or line level input
• Input Sensitivity: Mic: -47dBu (-49.2dBv or 3.4mVrms) Line: 0dBu (-2.2dBv or 0.775Vrms)
• Maximum Input Level: +22dBu
• Input Connector: XLR / 1/4” Combo jack
• Input Impedance: Balanced: 20kÙ - Unbalanced: 10kÙ
• Bass Response Optimizer: Subsonic Filter: 30Hz, Second-order filter
• Low-Frequency (Class D): Rated 150W RMS, 300W Peak
• High- Frequency (Class D): Rated 30W RMS, 60W Peak
• Electronic Crossover: 24dB per octave Linkwitz-Riley
• Crossover Frequency: 2.4kHz
• Controls: High (±10dB) 10kHz Shelving
• Equalization: Low (±10dB) 100Hz Shelving
• Low Frequency Transducer Size (mm / inches): 205mm / 8”
• Low Frequency Coil Size (mm / inches): 38.86mm / 1.53”
• Low Frequency Impedance: 4 Ù
• High Frequency Transducer Type: Compression Driver
• High Frequency Transducer Coil Size (mm / inches): 25mm / 1”
• High Frequency Transducer Exit Size (mm / inches): 30mm / 1.2”
• High Frequency Transducer Diaphragm Material: Cloth
• High Frequency Transducer Impedance: 8 Ù
• High Frequency Coverage (H x V): 90° x 60°
• Amplifier Protection: Power On Protection, Power switch on / off mute, Thermal Protection, Amplifier shutdown, Auto Reset, Low Line Voltage Shut Down <80VAC
• Weight: 8Kg (approx)
• Dimensions (HxWxD): 396 x 266 x 221mm