1100watt Powered 8'' PA Speaker - Single

Yamaha DXR8 active 8" speaker is equipped with highly efficient Class-D amplifiers that were optimally designed to match the high and low frequency transducers. Yamaha DXR8 delivers a powerful 1100W of power at an impressive SPL of 129dB. DXR8 feature Yamaha's proprietary FIR-X tuning which simultaneously optimizes frequency and phase response while adjusting the time alignment between the HF and LF transducers - creating an extremely smooth response around the crossover point.

Yamaha DXR powered speakers also come loaded with D-CONTOUR - an intelligent multi-band compressor that gives you powerful and consistent sound throughout all output levels. D-Contour constantly monitors the output of multiple frequency bands and calculates the optimum EQ adjustments for each, even at maximum SPL levels. DXR Series speakers provide two different D-CONTOUR settings: FOH/MAIN mode or MONITOR mode. FOH/MAIN mode boosts low-frequency to compensate for low-end that is typically missing when speakers are used in suspended applications or mounted on a speaker stand. MONITOR mode is completely optimized for floor monitor application by intelligently taming down the low-frequency that builds up due to floor reflection, smoothing out a wide range of frequency bands to give you stunning clarity for monitoring your sound.

Yamaha DXR8 is housed in a moulded in rugged, non-resonant ABS enclosure that has been designed to dampen down vibrations caused by high output levels, producing less distortion and superior sonic quality.

Yamaha DXR8 Specifications:

• Speaker type: 8" 2-way, Bi-amp powered speaker, Bass-reflex type
• Frequency Range (-10dB): 57Hz - 20kHz
• Nominal coverage: H90° x V60°
• LF Diameter: 8" cone, Voice Coil:2", Magnet:Ferrite
• HF Diaphragm: 1.4", Type: 1" throat compression driver, Magnet:Ferrite
• Crossover: FIR-X tuning™ (linear phase FIR filter)
• Output power: Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W)
• Maximum output level (1m; on axis): 129dB SPL
• I/O connectors: INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1), LINK OUT: XLR x 1
• Processors: D-CONTOUR :FOH / MAIN, MONITOR, OFF
• Power requirements: 100V - 240V, 50Hz/60Hz
• Power consumption: 90W
• Flying and mounting hardware: Top x2, Rear x1 (Fits for M8 x 15mm eyebolts)
• Pole socket: 35mm with 2-way features (0 or 7 degrees)
• Dimensions: W280mm (11") x H458mm (18") x D280mm (11")
• Net weight: 13.5kg (29.8lbs)
• Accessories: UB-DXR8 (U-barcket)
• Others: Material: ABS (Matte Finish, Black)